In 1986, Bryan McGroarty invented and patented the idea of bentonite on HDPE to form the waterproofing product that has become the industry standard for effectiveness and reliability. His company was called Paramount, and he sold Paramount along with its product line to another company that is still selling those products today. In 2008, Bryan started TegraSeal Products with the same products as he had invented at Paramount. Bryan’s son Pat continues today as the plant manager for TegraSeal Products.
John Fobes owns and manages TegraSeal Products in Bloomington, MN. He managed offices for a large
financial advisory firm beforehand. A great reputation is hard earned- and is the mark of both of John’s
companies, Northwestern Mutual and TegraSeal Products.
high performance bentonite waterproofing systems and Construction Joint Water Stops
TegraSeal Products manufactures high performance bentonite waterproofing systems and construction joint water stops. Designed for backfilled and blindside walls, under slabs, decks, tunnels, planters, or greenroof installations. TegraSeal provides design assistance for both adhere and mechanically fastened systems, approved applicators, independent inspections, with complete waterproofing and water retention systems.
Bentonite is ancient volcanic ash mined from Wyoming. Bentonite expands to several times its size when it gets wet, naturally sealing out water from intrusion. Bentonite can be layered onto HDPE to form a membrane that has two layers of protection in one- bentonite and HDPE. If water should penetrate through one layer, then the second layer stops it.
Used as Waterproofing- Sodium Bentonite has the ability to absorb small amounts of water and to prevent the penetration of more water. This is similar to creating a molecular “ball valve” where in the transmission rate through it drops as you increase the pressure. Only the sodium bentonite generates the internal pressure when it gets wet necessary to form a waterproof seal. The confinement of wet bentonite prevents further expansion and therefore stops water absorption and/or penetration. This is the mechanism bentonite uses to waterproof buildings. This confining expansion of wet bentonite also gives it the capability to prevent water migration, to self-repair damaged areas and to reseal cracks that will occur from time to time in most concrete. Bentonite’s capacity to self repair makes it the major sealing component and a potential life span measured in centuries, it is already up to 90 million years old and makes it the major sealing component of virtually all toxic waste and landfill projects. In combination with the strength and impervious qualities of high-density polyethylene (HDPE), bentonite/HDPE composite creates a strong, resealing waterproofing system providing waterproof protection for the lifetime of your building. The construction of permanent earthen dams, levees and ponds are rendered waterproof by the incorporation of bentonite products.
The fact that bentonite will form a waterproof seal to any impermeable material to which it is applied to or sandwiched between, makes it a vital component in the proper external placement of extruded polystyrene insulation because it forms a waterproof seal between the outside wall and the insulation. This feature allows the placement of insulation on the external side of the walls and floors of a building, thus placing the dew point temperature of the concrete in the insulation where it belongs, not on the interior wall where it can create condensation and nurture mold and mildew.
Does TegraSeal meet the requirements for providing points on Leed and GreenGlobe projects?
TegraSeal Products will contribute to several LEED and GreenGlobe points. Contact TegraSeal for more information.
Under what conditions can a TegraSeal waterproofing system be installed in a “salt water” environment?
We recommend that you send in a water sample to TegraSeal for testing before using our product in salt